Shaft holding has always been a difficult problem for users, which will not only affect the quality of concrete production, but also shorten the service life of the mixer. In fact, if you choose our manufacturer's double horizontal shaft mixer, there will be no such problem. We have changed the design of the double horizontal shaft mixer and greatly improved the shaft holding problem.

投料装置重新设计

Redesign of feeding device

水泥，粉煤灰等粉料的进料口位置位于两个搅拌轴之间，为了更好的让粉料进入，我们双卧轴式搅拌机经过特殊设计，让粉料在卸料的时候很好的避开搅拌轴，进入两根搅拌轴之间的位置，防止水泥在筒内积料。

The feeding port of cement, fly ash and other powder is located between the two mixing shafts. In order to better let the powder enter, our double horizontal shaft mixer is specially designed to make the powder avoid the mixing shaft and enter the position between the two mixing shafts during unloading, so as to prevent the cement from accumulating in the cylinder

供水系统重新设计

Redesign of water supply system

我们双卧轴式搅拌机的冲水点进行了精心设计，确保供水系统在清洗双卧轴式搅拌机内部的时候，能够充分清洗，尤其是关键位置，保证混凝土残渣不残留，清洗时增加专用加压泵，提高清洗效率。

The flushing point of our double horizontal shaft mixer is carefully designed to ensure that the water supply system can be fully cleaned when cleaning the inside of the double horizontal shaft mixer, especially at the key positions, so as to ensure that there is no residue of concrete residue. A special pressure pump is added during cleaning to improve the cleaning efficiency.

有效容积重新设计

Effective volume redesign

在双卧轴式搅拌机中，容积利用率很大程度上影响了搅拌效率与出料量，搅拌主轴在搅拌时，要淹没在混凝土以下，轴表面的混凝土就无法因为搅拌不到而凝固，从而有效了抱死的危害。

In the double horizontal shaft mixer, the volume utilization rate greatly affects the mixing efficiency and discharge volume. When mixing, the mixing spindle should be submerged below the concrete, and the concrete on the shaft surface cannot solidify because it cannot be mixed, so as to effectively solve the danger of locking.

搅拌臂重新设计

Redesign of mixing arm

双卧轴式搅拌机搅拌臂布置形式的设计能够加快物料轴向大循环运动的频次，同时增加物料合理逆流，从而增加物料与搅拌叶片直接接触并发生强制作用的机会，来搅拌低效区，提高搅拌质量。

The design of the layout of the mixing arm of the double horizontal shaft mixer can speed up the frequency of the axial large circulation movement of the material, and increase the reasonable countercurrent of the material, so as to increase the chance of direct contact and forced action between the material and the mixing blade, so as to eliminate the inefficient mixing area and improve the mixing quality.