Generally, in the process of using the self feeding mixing conveyor, if you want to improve the operation and use of the equipment and maintain the good performance of the equipment, you need to properly maintain the mixer. However, there are some precautions during maintenance. Let's understand it easily.

1.清洁机器时，只能擦拭电箱，不能冲洗电箱。

1. When cleaning the machine, only wipe the electric box, not flush the electric box.

2.要调节主轴密封圈密封套，有必要将泵芯和供油支架分开，然后拧紧三颗螺钉。拧紧螺钉后的标准配置：用8英寸可动手轻松拉动主轴的螺钉。

2. To adjust the sealing sleeve of the main shaft sealing ring, it is necessary to separate the pump core from the oil supply support, and then tighten the three screws. Standard configuration after tightening the screw: use 8 inches to easily pull the screw of the spindle.

3.在施工现场移动机器时，无论距离多远，都必须先拔掉电源线。

3. When moving the machine at the construction site, no matter how far away it is, the power cord must be unplugged first.

4.机器运行时，必须关闭并锁上电箱门，以防止灰尘和湿气进入并损坏机器组件。

4. When the machine is running, the door of the electric box must be closed and locked to prevent dust and moisture from entering and damaging the machine components.

5.轴承座应在工作前后每天加油，并应经常检查变速箱油。

5. The bearing pedestal shall be filled with oil every day before and after work, and the transmission oil shall be checked frequently.

6.每次清洁泵芯时，都需要添加少量硅油以防止润滑和刺穿。目的是防止转子铁芯生锈，并在下次顺利启动。

6. Each time the pump core is cleaned, a small amount of silicone oil needs to be added to prevent lubrication and puncture. The purpose is to prevent the rotor core from rusting and start smoothly next time.

由于自上料搅拌输送一体机采用全液压技术，因此有必要考虑液压预见的质量，以了解所有液压技术是否先进。由于该动力来自发动机，因此除了发动机的性能和质量外，还必须考虑汽车底盘的性能，承载能力和质量。为了严格执行维护，必须严格按照正确的操作流程进行车辆设备维护。

Since the all-in-one self feeding mixing and conveying machine adopts full hydraulic technology, it is necessary to consider the quality of hydraulic foresight to understand whether all hydraulic technologies are advanced. Since the power comes from the engine, in addition to the performance and quality of the engine, the performance, bearing capacity and quality of the vehicle chassis must also be considered. In order to strictly carry out maintenance, vehicle equipment maintenance must be carried out in strict accordance with the correct operation process.