您好,欢迎光临!莱州聚峰机械有限公司网站!

莱州聚峰机械有限公司

定制咨询热线:400-879-1999

行业新闻

首页>>资讯中心>>行业新闻自上料搅拌机出现不转的原因是啥?
联系我们
莱州聚峰机械有限公司

联系人:刘经理

电话:400-879-1999

地址:山东省莱州市206国道与308省道交叉口东南50米

自上料搅拌机出现不转的原因是啥?

来源:https://www.zishangliaojiaobanji.cn 日期:2022-04-06 发布人:admin
概述:  当我们使用自上料搅拌机进行工作时,发现搅拌机不转了,不知道如何处理,那么这个时候千万不能慌张更不能觉得停机了就能随意打开设备查
  当我们使用自上料搅拌机进行工作时,发现搅拌机不转了,不知道如何处理,那么这个时候千万不能慌张更不能觉得停机了就能随意打开设备查看零件,下面我们就来简单讲讲这个问题。
  When we use the self-feeding mixer for work, we find that the mixer does not turn and do not know how to deal with it. Then at this time, we should not panic, but we can not feel shut down and open the equipment to check the parts at will. Here we will briefly talk about this problem.
  查看搅拌机的开关按钮是否打开,或者断路器是否接通,再查看是否是主机检修门没有关好。的方法:根据上问的情况,开始初步的检查,先查看搅拌机的开关,断路器,主机检修门是否是工作状态,若不是,将它们分别调入工作状态。
  Check whether the switch button of the mixer is open or whether the circuit breaker is connected, and then check whether the maintenance door of the main engine is not properly connected. Solution: According to the above situation, start the preliminary inspection, first check whether the blender switch, circuit breaker, host maintenance door is working state, if not, put them into the working state respectively.
  润滑油泵无法正常工作<润滑油泵无法正常工作,可能是电源线出现故障,无法正常传输电流;或者润滑油泵里的电机出现故障或短路。方法:先检查电源线,观看具体情况,若有更换的需要,可以先更换一根新的电源线,再重新启动搅拌机,检查是否可以正常工作,如果不行,需要更换电机。
  Lubricating oil pump can not work normally < lubricating oil pump can not work normally, may be the failure of the power line, can not normally transmit the current; Or the motor in the oil pump fails or shorts. Solution: Check the power cord first and see the specific situation. If it is necessary to replace it, replace a new power cord first and then restart the blender to check whether it can work normally. If not, replace the motor.
  搅拌机内出现异响或震动,可能轴承出现损坏;或者电机与搅拌臂之间的联动皮带出现松动;在或者是电动机本身因缺乏润滑或零件老化出现异响,震动。方法:查看轴承,电机与搅拌臂,电机零件是否有问题,若有问题,将它们维修好,若损坏严重,更换相同型号的零件就OK!
  Abnormal sound or vibration in the mixer may damage the bearing; Or the linkage belt between the motor and the stirring arm becomes loose; In or the motor itself due to lack of lubrication or parts aging abnormal sound, vibration. Solution: Check whether there is a problem with the bearing, motor, stirring arm and motor parts. If there is a problem, repair them well. If the damage is serious, replace the parts of the same model.
  搅拌机转轴逆向旋转。遇到这个问题,可能是电动机的线接错了。方法:遇到电动机的线接错问题,很大可能是将它的正负极电源交换就好。
  The mixer rotates in the opposite direction. This problem may be caused by the wrong wiring of the motor. Solution: in case of the wrong connection of the motor, it is very likely to exchange its positive and negative power supply.
  搅拌机自动跳闸断电。可能是自上料搅拌机出现故障导致漏电,为了保护保护搅拌机使用,自动跳闸;或者是搅拌缸里原料太多,电动机带不动了。方法:先检查漏电保护器,根据实际情况,进行相对应的维修或者更换;如果是原料放的过多,可以减少搅拌缸内的原料,让搅拌机正常工作。
  The mixer will trip and power off automatically. It may be caused by power leakage caused by failure of the feeding mixer. In order to protect the safety of the mixer, it will trip automatically. Or there are too many raw materials in the mixing cylinder, and the motor can't move. Solution: first check the leakage protector, according to the actual situation, the corresponding maintenance or replacement; If the raw material is too much, you can reduce the raw material in the mixing tank, so that the blender works normally.
  搅拌机上盖密封不严,导致灰尘等杂物进入。这个情况可能是搅拌机长期工作,导致上盖变形,不能密封好,或者使用机器时,忘记检修门是否关了,也可能是观察窗口没有关严或破损。方法:如果上盖变形,更换一个相同型号的上盖,检查检修门和观察窗口是否关好,将这三点了,就可以完成了。
  The top cover of the mixer is not tightly sealed, resulting in dust and other sundries entering. This situation may be caused by the long-term work of the mixer, resulting in the deformation of the top cover, which cannot be sealed well, or forgetting whether the access door is closed when using the machine, or the observation window is not strictly or damaged. Solution: If the cover deformation, replace a cover of the same model, check whether the access door and observation window is closed, the three points can be solved, you can complete.
  综上所述,小编通过各个途径整理了搅拌机不转的原因和维修方法,如果使用时,搅拌机不转,可以按照上面的方法检查一下,先找到故障,然后找到对应的维修方法。想要知道更多资讯请继续关注网站www.zishangliaojiaobanji.cn吧。
  To sum up, xiaobian sorted out the reasons and maintenance methods of the blender through various ways. If the blender does not work when in use, it can be checked according to the above method, first find the fault, and then find the corresponding maintenance method. Want to know more information, please continue to focus on www.zishangliaojiaobanji.cn.

阅读/ Recommended reading

小型混凝土搅拌机生产效率高,搅拌质量好,操作简单,重量轻,自动化程度高,操作方便、移动方便、生产效率高等优点,所以使用的人是越来越

解析小型搅拌机的结构及各部分功... 2022-12-21
小型搅拌机整体生产效率受影响的... 2022-12-19
自上料搅拌车的罐体内部部件剖析 2022-12-16
自上料搅拌车离合器活塞密封性的... 2022-12-14
搅拌车结构会根据不同的路况进行... 2022-12-05
利用光照法观察搅拌机机油颜色是... 2022-12-02
混凝土搅拌机的常见三大故障 2022-11-30
自上料搅拌车预防漏油的六大措施 2022-11-28

截屏,微信识别二维码