现在很多的客户在使用小型搅拌机的过程中遇到了搅拌轴停止转动的现象，这种情况一般都会出现。那么小型搅拌机的搅拌轴怎么就停止转动了呢？下面小编就给大家讲解一下如何快速搅拌轴停止转动的情况。

　　Now many customers encounter the phenomenon that the mixing shaft stops rotating in the process of using a small mixer, which generally occurs. So why does the shaft of a small mixer stop spinning? The following xiaobian will explain to you how to quickly solve the situation that the stirring shaft stops rotating.

　　小型搅拌机的搅拌轴停止转动的原因：

　　Reasons why the mixing shaft of a small mixer stops rotating:

　　小型搅拌机的搅拌轴在生产过程中停止转动或转动稍慢是正常的。是否存在以下三种情况：

　　It is normal for the mixing shaft of a small mixer to stop rotating or rotate slightly slowly in the production process. Whether there are the following three situations:

　　电机传动皮带是否松动？小型搅拌机电机传动皮带太松，也会造成商品小型搅拌机的搅拌轴转动缓慢或停止转动，电机传动皮带太松，造成动力传递不足。是否严重超载？小型搅拌机的搅拌轴如果超过正常工作负荷，搅拌轴转动缓慢，负荷过大，搅拌轴停止转动或搅拌轴弯曲。

　　Is the motor drive belt loose? If the motor drive belt of self-mixing concrete mixer is too loose, it will also cause the mixing shaft of commercial concrete mixer to rotate slowly or stop rotating, and the motor drive belt is too loose, resulting in insufficient power transmission. Is it seriously overloaded? If the mixing shaft of self-mixing concrete mixer exceeds the normal working load, the mixing shaft rotates slowly, the load is too large, the mixing shaft stops rotating or the mixing shaft bends.

　　搅拌叶片或侧叶片与筒体内壁之间是否有大块异物？在这种情况下，混凝土自动上料搅拌机的搅拌轴将停止旋转或缓慢旋转。搅拌叶片或侧叶片与罐内壁之间有较大的异物，也会造成搅拌轴停转。之所以能卡住异物，是由于搅拌叶片或侧叶片与罐内壁间隙较大，尤其是石块。

　　Is there a large foreign body between the stirring blade or side blade and the inner wall of the cylinder? In this case, the shaft of the automatic concrete feeder will stop rotating or rotate slowly. Large foreign matter between the stirring blade or side blade and the inner wall of the tank will also cause the stirring shaft to stop. The reason why the foreign body can be stuck is because of the large gap between the mixing blade or side blade and the inner wall of the tank, especially the stone.

　　小型搅拌机搅拌轴停机的方法：

　　Solution to stop the mixing shaft of small mixer:

　　如果小型搅拌机电机传动皮带过松，只需在停机后调整小型搅拌机电机传动皮带的松紧度即可。小型搅拌机超载，导致搅拌轴停止转动。只需调整进料量，排出多余的物料，减少搅拌轴的旋转负荷。当物料卡在侧叶片与浇口内壁之间时，搅拌轴停止前常有尖锐刺耳的摩擦声。出现这种情况需要立即停机检查，人工异物，重新调整小型搅拌机搅拌叶片或侧叶片与罐内壁的间隙可用清水冲洗如有必要。

　　If the motor drive belt of the concrete mixer truck is too loose, only the tightness of the motor drive belt of the concrete mixer truck can be adjusted after the shutdown. The small mixer was overloaded, causing the shaft to stop turning. Only need to adjust the feed quantity, discharge the excess material, reduce the rotating load of the mixing shaft. When the material is stuck between the side blade and the inner wall of the gate, there is often a sharp and harsh friction sound before the mixing shaft stops. In this case, it is necessary to stop the machine immediately for inspection, remove foreign bodies manually, and re-adjust the gap between the mixing blades or side blades of the small mixer and the inner wall of the tank. Rinse with water if necessary.

　　另外，如果小型搅拌机内有物料，不能停止搅拌，防止物料凝固。以上便是问题的解答了，如果您想了解更多这方面的资料的话，就赶紧来我们网站www.zishangliaojiaobanji.cn进行咨询吧。

　　In addition, if there is material in the small mixer, can not stop stirring, to prevent material solidification. Above is answer the question, if you want to know more about this information, quickly come to our website www.zishangliaojiaobanji.cn for consultation.