通常，诸如自上料搅拌机之类的车辆设备在表面上具有一层油漆，以更好地保护车辆的外部和外部。在正常操作期间，油漆很容易损坏，因此，这是保护搅拌机油漆不受损坏的方法。

In general, vehicle equipment such as a self loading mixer has a layer of paint on the surface to better protect the exterior and exterior of the vehicle. During normal operation, the paint is easily damaged, so this is a method to protect the paint of the mixer from damage.

如果您不喜欢自上料搅拌机的涂漆表面，金属漆会开裂得很小，并且会继续渗透到漆层中，直到它渗透到整个漆层中为止。如果裂缝中含有蜡，则身体会变得斑纹。定期打蜡可以逐渐减少裂纹。

If you do not like the painted surface of the self feeding mixer, the metallic paint will crack very small and continue to penetrate into the paint layer until it penetrates into the whole paint layer. If the cracks contain wax, the body will become spotted. Regular waxing can gradually reduce cracks.

当暴露在阳光下时，自上料搅拌机会不断蒸发，以保护空气中的油。随着时间的流逝，油漆油将变得过度分散。涂漆表面的亮度和深度将大大降低，涂漆表面将逐渐变白，将形成氧化层，并缩短涂层寿命。如果自动进料混合器的涂漆表面被严重氧化，则可以通过研磨和抛光进行处理。

When exposed to the sun, the self feeding mixer will continuously evaporate to protect the oil in the air. Over time, the paint oil will become excessively dispersed. The brightness and depth of the painted surface will be greatly reduced, the painted surface will gradually turn white, an oxide layer will be formed, and the coating life will be shortened. If the painted surface of the automatic feed mixer is severely oxidized, it can be treated by grinding and polishing.

自上料搅拌机的表面磨损。它可能是由昆虫，禽粪，树液，柏油或沥青引起的。一些小的蚀刻可以通过研磨和抛光解决。除了上述方法之外，为了有效地防止油漆溅到车辆上，在驾驶时必须注意驾驶并避免碰撞和摩擦。否则，会发生其他损坏。

The surface of the self feeding mixer is worn. It may be caused by insects, bird droppings, tree sap, tar or asphalt. Some small etchings can be solved by grinding and polishing. In addition to the above methods, in order to effectively prevent paint splashing on the vehicle, you must pay attention to driving and avoid collision and friction. Otherwise, other damage may occur.

此外使用后注意紧固件是否松动，并及时紧固。所有搅拌机均采用工作通道，紧固件应及时检查。搅拌机减速箱使用一段时间后，检查其润滑油位的凹凸情况，并及时补偿查询孔处可见的油质为30#的机械油。润滑油是机械设备的重要组成部分。如果润滑油没有及时补偿，可能会导致传动部件磨损，因此必须及时检查润滑油。

In addition, pay attention to whether the fasteners are loose after use and tighten them in time. All mixers adopt working channels, and fasteners shall be inspected in time. After the mixer reducer has been used for a period of time, check the concave convex condition of its lubricating oil level, and timely compensate the mechanical oil with the oil quality of 30 \. Lubricating oil is an important part of mechanical equipment. If the lubricating oil is not compensated in time, the transmission parts may be worn, so the lubricating oil must be checked in time.

更多内容的了解建议您来关注网站www.zishangliaojiaobanji.cn咨询！

For more information, we recommend you to follow the website www.zishangliaojiaobanji Cn consultation!