In recent years, with the increase of engineering projects, the demand for concrete has soared. In order to save cost and time as much as possible in the project, some construction sites began to use self loading mixer trucks. So what should we pay attention to if the use of self loading mixer is better?

过去在工地使用混凝土需要到搅拌站拉，但在运输过程中时间成本和车辆成本太高。因此，现在很多施工方都采用现场生产混凝土的方法来节省成本。

In the past, concrete used to be pulled from the mixing plant at the construction site, but the time cost and vehicle cost are too high in the transportation process. Therefore, many construction companies now adopt the method of on-site production of concrete to save costs.

混凝土制成后，由于其自身特性，需要在很短的时间内运送到施工现场。对于混凝土来说，这个时间窗口很小，需要不断地流动，防止它凝固。浇水需要连续浇水，间隔不能太长，否则对工程质量影响很大。

After the concrete is made, it needs to be transported to the construction site in a very short time due to its own characteristics. For concrete, this time window is very small, and it needs to flow continuously to prevent it from solidification. Watering needs continuous watering, and the interval should not be too long, otherwise it will have a great impact on the project quality.

自上料搅拌车在运用过程中不只要做好自身的保养和保护，搅拌车选型应根据混凝土工程对象、特色、请求的较大输送间隔、混凝土修建方案、混凝土泵方式以及详细条件行归纳思考。

The self loading mixer truck does not only need to maintain and protect itself in the process of operation, but also should be summarized and considered according to the concrete project object, characteristics, required large conveying interval, concrete construction scheme, concrete pump mode and detailed conditions.

修建的类型和构造搅拌车的功能随机型而异，选用机型时除进思考混凝土浇注量以外，还应思考修建的类型和构造、施工技术请求、现场条件和环境等。通常选用的搅拌车的首要功能参数应与施工请求相符或稍大，若能力过大，则利用率低，过小，不只满意不了请求还会加快搅拌车的损耗。

The type and structure of construction and the function of the mixer truck vary randomly. When selecting the model, in addition to considering the amount of concrete pouring, we should also consider the type and structure of construction, construction technical requirements, site conditions and environment, etc. Generally, the primary functional parameters of the selected mixer truck should be consistent with the construction requirements or slightly larger. If the capacity is too large, the utilization rate is low and too small, which will not only satisfy the requirements, but also accelerate the loss of the mixer truck.

每次装料前用水冲刷进料口，使进料口在装料时坚持湿润；在装料的一起向随车自带的清洁用水水箱中注满水；装料后冲刷进料口，洗净进料口邻近残留的混凝土；到工地卸料后，冲刷出料槽，然后向混凝土贮罐内加清洁用水30—40L；在车辆回程时坚持混凝土贮罐正向慢速滚动；下次装料前牢记放掉混凝土贮罐内的污水；天天收工时完全清洁混凝土贮罐及进出料口周围，确保不粘有水泥及混凝土结块。

Wash the inlet with water before each loading to keep it moist during loading; Fill the clean water tank brought with the vehicle with water together with the loading; Wash the inlet after loading, and clean the residual concrete near the inlet; After unloading at the construction site, wash the discharge chute, and then add 30-40l of clean water to the concrete storage tank; Keep the concrete storage tank rolling forward and slowly when the vehicle returns; Remember to discharge the sewage in the concrete storage tank before the next loading; At the end of each day, the concrete storage tank and the surrounding of the inlet and outlet shall be completely cleaned to ensure that there is no cement and concrete caking.

自上料搅拌车的广泛应用，不仅节省了施工时间，还能降低了人工成本。自上料搅拌车在整个过程中起到了衔接作用，不仅是提高施工效率那么简单，更多的信息就来网站https://www.zishangliaojiaobanji.cn咨询吧。

The wide application of self loading mixer not only saves construction time, but also reduces labor costs. Since the loading mixer plays a connecting role in the whole process, it is not only as simple as improving the construction efficiency, but also more information can be found on the website https://www.zishangliaojiaobanji.cn Consult.