搅拌机在长期使用过程中总会有腐蚀物质出现，那有哪些方法可以去除呢？下面就来简单了解下吧。

There will always be corrosive substances in the long-term use of the mixer. What methods can be used to remove them? Now let's have a brief understanding.

加适量的工业用醋酸，或者将适量的氯化铵溶于水配成溶液，注入到搅拌机罐体中，并间歇性转动若干次。注意：不能用酸性较强的盐酸和稀硫酸，腐蚀性很强，更不能用浓稀硝酸。

Add an appropriate amount of industrial acetic acid, or dissolve an appropriate amount of ammonium chloride in water to prepare a solution, inject it into the mixer tank, and rotate it intermittently for several times. Note: hydrochloric acid and dilute sulfuric acid with strong acidity and strong corrosiveness shall not be used, and concentrated dilute nitric acid shall not be used.

搅拌机配的水箱，每次卸完料后就应该将水放入罐体内，在返回时搅拌行驶，到搅拌站后再将水排出接料。罐体外表在水箱加水时可顺便清洗。如果覆着的水泥浆已经凝固，只能慢慢清理。实在不行可以联系厂家提供的方案。

The water tank equipped with the mixer should put the water into the tank after unloading each time. When it returns, it should be agitated and driven. After reaching the mixing station, the water should be discharged to receive the materials. The outer surface of the tank can be cleaned when the water tank is filled with water. If the covered cement slurry has set, it can only be cleaned slowly. Can't really contact the manufacturer to provide professional solutions.

搅拌机底盘的维护是很重要的，在雨中驾驶搅拌机，润滑油等容易洗掉雨水，导致底盘易受腐蚀，所以注意自动上料搅拌机底盘的清洁和防锈处理是很重要的。搅拌机零部件如果脏了，过滤效果就会恶化，在油缸中过度杂质，增加零件磨损，会增加失败的可能性;如果被严重堵塞，就会导致机辆不能正常工作。

The maintenance of the mixer chassis is very important. When driving the automatic feeding mixer in the rain, the lubricating oil is easy to wash off the rain, and the chassis is easy to be corroded. Therefore, it is important to pay attention to the cleaning and rust prevention of the chassis of the automatic feeding mixer. If the parts of the mixer are dirty, the filtering effect will deteriorate. Excessive impurities in the oil cylinder will increase the wear of the parts and increase the possibility of failure; If it is seriously blocked, the vehicle will not work normally.

小型混凝土搅拌机清洗方法

Cleaning method of small concrete mixer

每次装料前用水冲洗进料口，使进料口在装料时保持湿润。

Wash the inlet with water before each loading to keep the inlet moist during loading.

在装料的同时向随机自带的清洗用水水箱中注满水。

Fill the self-contained cleaning water tank with water while loading.

装料后冲洗进料口，洗净进料口附近残留的混凝土。

After loading, wash the inlet and clean the residual concrete near the inlet.

到工地卸料后，冲洗出料槽，然后向混凝土贮罐内加清洗用水30-40L在机辆回程时保持混凝土贮罐正向慢速转动。

After unloading at the construction site, flush the discharge tank, and then add 30-40l of cleaning water to the concrete storage tank to keep the concrete storage tank rotating slowly in the forward direction during the return of the locomotive.

下次装料前切记放掉混凝土贮罐内的污水。

Remember to discharge the sewage in the concrete storage tank before the next loading.

每天收工时清洗混凝土贮罐及进出料口周围，保证不粘有水泥及混凝土结块。

Clean the concrete storage tank and the surrounding of the inlet and outlet at the end of each day to ensure that there is no cement and concrete caking.

如果一旦不小心忘记及时清洗，事后及时使用风炮清洁，避免清罐的损失。

If you forget to clean it in time once you are careless, use an air gun to clean it in time afterwards to avoid the loss of tank cleaning.

任何机辆在使用过程中都会产生损耗，如果不及时清理会损伤搅拌桶，影响搅拌机使用寿命，所以小型混凝土搅拌机如何清洗干净是很重要的。更多注意事项就来我们网站https://www.zishangliaojiaobanji.cn看看吧。

Any machine will be lost during use. If it is not cleaned in time, it will damage the mixing bucket and affect the service life of the mixer. Therefore, it is very important to clean the small concrete mixer. For more information, please visit our website https://www.zishangliaojiaobanji.cn Let's see.