1. Mixing system

JS1000混凝土搅拌机的搅拌系统由电动机、皮带轮、减速器、开式齿轮、搅拌筒搅拌装置、供油装置等部件组成。

The mixing system of JS1000 concrete mixer consists of motor, pulley, reducer, open gear, mixing drum, mixing device, oil supply device and other components.

电动机与摆线针减速器相接，减速器两输出轴经两对开式齿轮分别带动两根水平配置的搅拌轴进行反向等速回转。

The motor is connected with the cycloidal needle reducer, and the two output shafts of the reducer drive the two horizontally configured mixing shafts to rotate at a reverse constant speed through two pairs of open gears.

2. 上料系统

2. Feeding system

上料系统有卷扬机构、上料龙架、料斗、进料嘴等部件组成。

The feeding system is composed of winch mechanism, feeding dragon frame, hopper, feeding nozzle and other components.

制动电机保证料斗满负荷运行时可停在任意位置，制动力矩由电机后座的大螺母调整。

The brake motor ensures that the hopper can stop at any position when running at full load, and the braking torque is adjusted by the large nut on the back seat of the motor.

3. 供水系统

3. Water supply system

JS1000混凝土搅拌机的供水系统由水泵、节流阀、清洗装置、喷淋装置组成。

The water supply system of JS1000 concrete mixer is composed of water pump, throttle valve, cleaning device and spraying device.

通过气缸带动节流阀可调节水的流量，面供水总量由电子称调节。

The flow of water can be adjusted by driving the throttle valve through the cylinder, and the total amount of surface water supply is adjusted by the electronic scale.

4. 卸料系统

4. Unloading system

JS1000混凝土搅拌机的卸料系统由卸料六、气泵、换向阀、分气阀、气缸、电气等机构组成。

The unloading system of JS1000 concrete mixer is composed of unloading VI, air pump, reversing valve, air distribution valve, air cylinder, electrical and other mechanisms.

卸料门安装在搅拌机底部，通过气缸，实现气动卸料。以及卸料门的开闭位置，通过调整密封条的位置可保证卸料门密封。JSS1000卸料手动操作杆是为临时停电时应急卸料和气缸失灵时卸料之用，平时应将其拆下，以防伤人。

The discharge door is installed at the bottom of the mixer to realize pneumatic discharge through the cylinder. And the opening and closing position of the discharge door. The sealing of the discharge door can be ensured by adjusting the position of the sealing strip. Jss1000 unloading manual operating lever is used for emergency unloading in case of temporary power failure and unloading in case of cylinder failure. It should be removed at ordinary times to prevent personal injury.

5. 电气系统

5. Electrical system

电气控制线路设有空气开关、熔断器、热继电器，具有短路保护、过载保护的功能。所有控制按钮及空气开关手柄和指示灯均布置在配电箱门上，并设有门锁。按钮外面设有防护罩。

The electrical control circuit is equipped with air switch, fuse and thermal relay, which has the functions of short-circuit protection and overload protection. All control buttons, air switch handles and indicator lights are arranged on the door of the distribution box and equipped with door locks. A protective cover is arranged outside the button.

电气控制电源为380V三相四线制电源，电压允许误差为±10%，否则禁止使用。若用户自备发电电源，容量应≧100KVa。电动机的表面温升≦60℃，带电部分对外壳缘≧0.5MΩ。

The electrical control power supply is 380V three-phase four wire power supply, and the allowable voltage error is ± 10%, otherwise it is prohibited to use. If the user provides its own power supply, the capacity shall be ≥ 100kVA. The surface temperature rise of the motor is ≤ 60 ℃, and the live part to the shell edge is ≥ 0.5m Ω.

以上的精彩内容来自：小型搅拌机提供分享，更多的精彩内容请点击进入我们的网站：https://www.zishangliaojiaobanji.cn，我们会有更多的精彩内容等您查看

The above wonderful content comes from the small mixer. For more wonderful content, please click to enter our website: https://www.zishangliaojiaobanji.cn , we will have more wonderful content for you to see