自上料搅拌车转向助力泵，我们通常把它叫做方向机助力泵，它是清障车转向助力系统的动力源，也是转向系统的心脏部分。对于重型清障车来说，由于机械式方向机，驾驶员操作劳动强度大，所以液压转向系统就更为重要。今天我们来了解一下自上料搅拌车助力泵维护细节。

The power steering pump of the self loading mixer is usually called the steering motor power pump, which is the power source of the steering power system of the obstacle removal vehicle and the heart of the steering system. For heavy obstacle removal vehicles, the hydraulic steering system is more important because of the mechanical steering gear and the driver's labor intensity. Today we will learn about the maintenance details of the booster pump of the self loading mixer.

一、在使用中如发现方向机助力泵渗漏，冲击或有异常的噪音，应及时检查排除。

1、 In case of any leakage, impact or abnormal noise found in the steering gear booster pump during use, it shall be checked and eliminated in time.

二、自上料搅拌车运行一段时间后，应及时更换液压油几滤芯，尤其是新泵装车后使用2500-3000应更换液压油。

2、 After the charging mixer has been running for a period of time, the hydraulic oil filter element shall be replaced in time, especially after the new pump is loaded and used for 2500-3000km.

三、定期检查储油罐的油平面，不足应及时补充清洁的液压油，储油罐内的滤芯应在保养时用酒精清洗干净。

3、 Regularly check the oil level of the oil storage tank. If it is insufficient, clean hydraulic oil shall be replenished in time. The filter element in the oil storage tank shall be cleaned with alcohol during maintenance.

四、正确选择液压油是保证助力泵效率，延长寿命的关键。‘

4、 Correct selection of hydraulic oil is the key to ensure the efficiency and prolong the service life of booster pump‘

此外一些注意事项要多多来注意，比如：

In addition, pay more attention to some precautions, such as:

自动上料搅拌车使用时长达3个月时，同样需要更换，不同企业的液压油不能混合使用，更换液压油时，油管、油管接头、散热器、液压泵、液压马达需要清洗干净，避免造成液压马达、液压泵使用故障，延长寿命。

When the automatic feeding mixer has been used for 3 months, it also needs to be replaced. The hydraulic oils of different brands cannot be mixed. When replacing the hydraulic oil, the oil pipes, oil pipe joints, radiators, hydraulic pumps and hydraulic motors need to be cleaned to avoid the use failure of the hydraulic motors and hydraulic pumps and extend their service life.

维修调试喷油泵事，需要对行程余量进行检查，以此判断喷油泵是否需要进行调整，将柱塞与套筒的磨损降到低，驾驶员得要根据喷油泵的不同结构采用不同方法进行检查。

For the maintenance and commissioning of the fuel injection pump, the stroke margin needs to be checked first to determine whether the fuel injection pump needs to be adjusted, so as to reduce the wear of the plunger and sleeve to a low level. The driver must use different methods to check according to the different structures of the fuel injection pump.

以上就是小编为大家介绍的自上料搅拌车助力泵维护的细节，在平常使用中记得多注意进行维护保养才能让该设备的使用寿命有所增加，您还有什么问题或有什么需求就来我们网站https://www.zishangliaojiaobanji.cn进行咨询吧！

The above is the maintenance details of the booster pump of the self feeding mixer introduced by Xiao Bian. Remember to pay more attention to maintenance in ordinary use to increase the service life of the equipment. If you have any questions or needs, please come to our website https://www.zishangliaojiaobanji.cn Consult!