小型搅拌机为什么会突然熄火呢？有问题就会有原因，只有找到对应的原因，我们才能更好的进行，以及做好预防。

Why did the small mixer suddenly shut down? If there is a problem, there will be a reason. Only by finding the corresponding reason, can we better solve it and prevent it.

确定油路畅通，柴油机供给系统没有空气后，可拆开油泵盖板，板动操纵手柄，拨动油泵拉杆，看拉杆是否灵活和柱塞弹簧是否断裂。

After confirming that the oil circuit is unblocked and there is no air in the diesel engine supply system, the cover plate of the oil pump can be removed, the operating handle can be moved, and the pull rod of the oil pump can be pulled to see whether the pull rod is flexible and whether the plunger spring is broken.

在小型搅拌机拉杆灵活和柱塞弹簧没断的情况下，可启动柴油机中速运转10分钟，还有断火现象时，可用一只铜榔头轻轻敲击输油泵大螺帽，一边敲一边听柴油机声音，如果声音不正常，说明输油泵活塞和推杆发卡，进行修理或更换。

Under the condition that the pull rod of the small mixer is flexible and the plunger spring is not broken, the diesel engine can be started to run at a moderate speed for 10 minutes. If the fire is still broken, a copper hammer can be used to gently tap the large nut of the fuel transfer pump to listen to the sound of the diesel engine. If the sound is abnormal, it means that the piston and push rod of the fuel transfer pump are jammed for repair or replacement.

拆下喷油器总成，转动曲轴数圈，即有水喷出，说明缸盖，缸体有裂纹或砂眼，遇到这种情况时，可向用户解释或向小型搅拌机公司反映。

Remove the fuel injector assembly and rotate the crankshaft for several cycles, which means that water is ejected, indicating that the cylinder head and cylinder block have cracks or sand holes. In this case, you can explain to the user or report to the small mixer company.

低压油流畅通后，可用手压泵排除油路中的空气，打开泵头放气螺钉，直到没有气泡时，方可上紧放气螺钉。

After the low pressure oil flow is unblocked, the air in the oil circuit can be removed by the hand pump, and the air release screw of the pump head can be opened until there is no bubble, then the air release screw can be tightened.

油嘴不雾化，油泵柱塞弹簧和弹簧座断裂，卡死不工作，或是柴油内有水。拆下油嘴总成检查开启压力和雾化，如果油嘴总成正常，可让用户用干净柴油装入壶中用油路旁接法进行试验。

The nozzle does not atomize, the plunger spring and spring seat of the oil pump are broken, stuck and do not work, or there is water in the diesel. Remove the nozzle assembly to check the opening pressure and atomization. If the nozzle assembly is normal, the user can use clean diesel oil to load it into a pot and use the oil circuit side connection method to test.

打开小型搅拌机油箱开关，拆下输油泵进油管，看油流情况，如果油流很快，说明正常，如果油流时断时续查油路。

Open the oil tank switch of the small agitator, remove the oil inlet pipe of the oil transfer pump, and check the oil flow. If the oil flow is fast, it indicates that it is normal. If the oil flow is intermittent, check the oil circuit.

小型搅拌机突然熄火的正确方法就讲解到这里了，您对此有什么想咨询的问题欢迎来我们https://www.zishangliaojiaobanji.cn这里了解！

That's all for the correct solution to the sudden flameout of the small mixer. If you have any questions, please come to us https://www.zishangliaojiaobanji.cn Here to understand!