The heating of the working motor of the small mixer is a normal phenomenon. Under normal conditions, the heat generated by the motor will be distributed through the motor shell in time, so as to ensure the stable operating temperature inside the motor and protect the internal parts of the motor from damage.

小型搅拌机使用后电机严重发热出现原因如上述情况有两种原因造成：一、电机绕组热量散发多来不及通过外壳散发；二、电机外壳散发热量能力差。这两种因素都会造成小搅拌机电机热量过大导致电机烧毁。

There are two reasons for the serious heating of the motor after the use of the small mixer: first, the heat of the motor winding is too late to be dissipated through the shell; 2、 The heat dissipation capacity of motor shell is poor. These two factors will cause excessive heat of the motor of the small mixer and cause the motor to burn out.

以上两种因素造成电机过热其根本原因在于：

The root causes of motor overheating caused by the above two factors are:

一、小型搅拌机电机绕组产热过多，根本问题在于电机导线非纯铜导线所致，纯铜导线导电能力强，电阻小，故而产热少，如若其他材质导线电机工作时电阻大产热多；

1、 The motor winding of the small mixer produces too much heat. The fundamental problem is that the motor conductor is not a pure copper conductor. The pure copper conductor has strong conductivity and low resistance, so it produces less heat. If the conductor of other materials has high resistance, the motor produces more heat when working;

二、小型搅拌机作业后电机外壳散热能力差，根源在于外壳非纯铝材质。合金铝质量轻散热能力强，采用其他材质作为电机外壳，散热能力故而不及铝材质。

2、 The reason for the poor heat dissipation capacity of the motor shell after the operation of the small mixer is that the shell is not made of pure aluminum. Alloy aluminum has light weight and strong heat dissipation capacity. Other materials are used as motor shell, so the heat dissipation capacity is not as good as aluminum.

综上所述，以上两种因素皆属于小型搅拌机厂家为节省生产成本而造成。

To sum up, the above two factors are caused by small mixer manufacturers to save production costs.

以上的精彩内容来自：小型搅拌机更多的精彩内容来自：https://www.zishangliaojiaobanji.cn欢迎大家与我们进行交流。

The above highlights come from: small mixer, and more highlights come from: https://www.zishangliaojiaobanji.cn Welcome to communicate with us.